Timing Chain Replacement in Batumi

Timing Chain Replacement in Batumi

Need a timing chain replacement near you in Batumi? It's done at PRO SERVICE (Airport Highway 212M). We confirm the chain has stretched using scan data and an inspection, replace it as a kit (tensioner, guides and rails, plus sprockets or cam phasers if they're worn) and check the timing once the engine is running. Labor from 180 GEL, takes 1-2 working days. Parts are billed separately.

A chain is not forever: how to tell it is time

Unlike a belt, a timing chain isn't changed at a set mileage. It's replaced when it wears out. Here's what that sounds and looks like:

  • Rattle for the first few seconds after a cold start. The hydraulic tensioner has no oil pressure yet, so a stretched chain slaps against the guide.
  • Cam/crank correlation codes, or a check engine light with no obvious reason.
  • Rough idle, weak pull at low revs and higher fuel use, because the timing has drifted.
  • Metal flakes or bits of plastic from the guides turning up in the oil at an oil change.
  • On some engines you can see the tensioner sitting close to its limit through an inspection port or in scan data.

If the chain jumps a tooth, the valves on many engines hit the pistons. Then you're into a cylinder head repair.

Why chains stretch early

Oil is the big one. It lubricates the drive and feeds the tensioner, so long change intervals or the wrong viscosity wear the chain fast. Hours of idling in traffic and short trips where the engine never warms up don't help. Used imports with no service history are a lottery. And on some models the chain is simply a known weak spot by design.

How we replace it

  1. We confirm the stretch with the scan tool (timing deviation), check the tensioner and listen.
  2. The front covers come off, and the shafts are locked with locking tools or by the marks.
  3. Chain, tensioner, guides and rails get replaced, plus sprockets and cam phasers if they show wear.
  4. New gaskets, a new crankshaft seal and fresh oil.
  5. First start, a timing check with the scan tool, and a quiet cold start.

From then on, the new drive wants oil of the right viscosity, changed on the severe-service interval. Batumi traffic and heat count as severe service.

Does your engine have a belt instead of a chain? Then you want timing belt replacement.

What affects timing chain replacement cost

  • Layout. On some engines the drive sits at the back, next to the gearbox, and the whole engine has to come out.
  • One chain or several (V engines, separate chains for the oil pump and balance shafts).
  • Phasers and sprockets, if they need replacing.

Price

WorkPrice, GEL
Timing chain replacement (labor)from 180
Chain stretch diagnosticsfrom 30
Oil changefrom 30

FAQ

How much does a timing chain replacement cost?

Labor from 180 GEL. What the chain kit costs depends on the model and whether you go OEM or aftermarket.

Can I replace just the chain and keep the tensioner?

We wouldn't. An old tensioner and worn guides will stretch a new chain in no time.

A 2-3 second rattle on a cold start. Is that the chain?

Often it is. Hydraulic lifters and a tensioner check valve can sound much the same, though, so we confirm it with a check.

How long will it take?

1-2 working days, longer if the engine has to come out.

●  06 · Contact

Leave a request — we'll call back and book an inspection

Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.

By sending the request you accept the privacy policy.

Or message us — we reply right there:

Address
Airport Highway 212M, Batumi, Georgia
Phone / WhatsApp / Telegram
+995 599 66 66 75 · WhatsApp · Telegram
Directions
Google Maps ↗Yandex ↗Waze ↗
PRO SERVICE entrance