BMW Timing Chain Replacement in Batumi
BMW timing chain replacement near you in Batumi, at PRO SERVICE on Airport Highway 212M. Then the chain comes out together with the tensioner, guides and sprockets, and the new set is timed with locking tools made for that specific engine. Labor starts at 180 GEL. The job takes 1-3 days. Parts go on an estimate you approve first.
Signs of a stretched BMW timing chain
- A metallic whine or whirr that climbs with the revs. Worn guides usually sound like that.
- Rattle for the first few seconds after a cold start.
- VANOS or camshaft position codes and a Check Engine light.
- The car feels down on power or idles rough.
- Bits of plastic guide turning up in the oil pan or the filter.
Which BMWs come in with chain issues
The N47 diesel is the classic one: 118d, 120d, 320d, 520d and the X models that got this engine. Its chain lives at the back, on the gearbox side, and in many cases the engine has to come out to do the job properly. So it takes longer and costs more than on most cars.
- N20 petrol, common in the F30 3 Series, the 5 Series, X1 and X3. On a number of these the timing chain guides wear out, and so does the guide on the oil pump drive chain. If that guide breaks it can upset lubrication, so get it checked early.
- Any other BMW engine we judge by VIN and engine diagnostics, because the amount of work varies a lot.
What is specific to a BMW chain job
Locking tools per engine. BMW timing gets set with dedicated camshaft and flywheel locking tools. Lining up marks by eye isn't how it's done.
We fit the full kit: chain, tensioner, guides and sprockets. On an N20 we also look at the oil pump chain while we're in there. Once it's back together we check how VANOS works and watch cam timing in live data, then clear the codes and reset adaptations.
Oil has to meet BMW approval (BMW Longlife approval from the service book). Chain stretch often goes hand in hand with long oil change intervals, which is why after this repair we recommend changing it more often.
Price
| Work | Price, GEL |
|---|---|
| Engine and cam timing diagnostics | from 30 |
| Timing chain replacement (labor) | from 180 |
| Engine removal and refit (N47) | from 300 |
| Oil change | from 30 |
FAQ
How much does timing chain replacement cost on a BMW 3 Series?
Labor starts at 180 GEL. See our price list. Which engine you have matters a lot, since an N20 petrol and an N47 diesel are completely different jobs. We give you the exact number after diagnostics.
Why is the N47 so expensive?
Because the chain is at the rear of the engine and a full replacement usually means pulling the engine. Those are hours of labor a front-chain engine simply doesn't need.
My BMW engine whines. Is it definitely the chain?
Not necessarily. A drive belt, a pulley or the turbo can make a similar noise. We diagnose first and decide after.
Can I drive with a stretched chain?
It's a gamble. A broken guide or a chain that jumps can take the cylinder head with it.
● 06 · Contact
Leave a request — we'll call back and book an inspection
Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.
By sending the request you accept the privacy policy.
Or message us — we reply right there:
- Address
- Airport Highway 212M, Batumi, Georgia
- Phone / WhatsApp / Telegram
- +995 599 66 66 75 · WhatsApp · Telegram
- Directions
- Google Maps ↗Yandex ↗Waze ↗
