Mercedes-Benz Timing Chain Replacement in Batumi
Then we put in a new chain with tensioner and guides, plus camshaft adjusters if they're worn, and set the timing with locking tools. Labor starts at 180 GEL. The job takes 1-2 days. Parts are extra and go on the estimate.
Mercedes timing chain rattle and other signs it's due
- It rattles for the first seconds of a cold start. The tensioner hasn't built oil pressure yet, and the chain is already stretched.
- Crankshaft/camshaft correlation codes and a Check Engine light.
- The idle is rough, power drops off, fuel use goes up.
- Sometimes there's no noise at all yet, but live data shows the cam timing deviation sitting near the limit.
Which Mercedes we see with it
C180, C200, E200 with supercharger or turbo. On a number of these engines a stretched chain and worn camshaft adjusters are a common sight at high mileage, especially when the oil was changed rarely.
Sprinter and Vito vans are diesels with big mileage and commercial loads, so their chains work hard. How much work a Sprinter needs depends a lot on the engine. On some of them getting to the chain is far harder, which is why we only quote after an inspection. V6 and V8 engines have several chains, so the job is longer and costs more. Other faults on these engines are covered under Mercedes engine repair. We price those separately.
How we replace a Mercedes chain
- Diagnostics: live cam timing data, a tensioner check, a look at the oil.
- Choosing the method. On many Mercedes engines the new chain can be pulled through by the old one and joined with a master link riveted using a special tool, without taking off the front cover. If the guides, sprockets or cam adjusters are worn, we tear it down fully.
- We lock the camshafts and crankshaft with tools made for that engine and replace the tensioner and guides.
- We check the timing marks, turn the engine over by hand, start it, confirm cam timing on the scanner and clear the codes.
- Fresh oil to the Mercedes-Benz approval (MB approval from the service book). After a job like this you don't want old oil full of wear debris left in the engine.
Price
| Work | Price, GEL |
|---|---|
| Engine and cam timing diagnostics | from 30 |
| Timing chain replacement (labor) | from 180 |
| Camshaft adjuster replacement | from 200 |
| Oil change | from 30 |
FAQ
How much is a timing chain replacement on a Mercedes C180?
Labor starts at 180 GEL. The total depends on whether a chain and tensioner will do or the cam adjusters and guides have to go too. Diagnostics will tell us which.
Is a Sprinter chain job the same as on a car?
No. On a Sprinter it depends on the engine, and some need a lot more taken apart. We give you the time and the price after we've inspected it.
Can I replace only the tensioner?
A new tensioner can hide the rattle for a while, but a stretched chain stays stretched. We look at the timing data, and if the chain is at its limit we replace the whole kit.
What happens if I leave it?
The chain can jump a tooth on the sprocket. On many engines that means valves hitting pistons and a cylinder head repair.
● 06 · Contact
Leave a request — we'll call back and book an inspection
Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.
By sending the request you accept the privacy policy.
Or message us — we reply right there:
- Address
- Airport Highway 212M, Batumi, Georgia
- Phone / WhatsApp / Telegram
- +995 599 66 66 75 · WhatsApp · Telegram
- Directions
- Google Maps ↗Yandex ↗Waze ↗
