Timing Belt Replacement in Batumi
Timing belt replacement in Batumi at PRO SERVICE (Airport Highway 212M): we replace the belt along with the rollers and, where it makes sense, the water pump, then set the timing marks and check that it starts and runs right. Labor from 90 GEL, takes 4-8 hours. Parts are billed separately. On a lot of engines, a snapped belt turns into an expensive repair.
Belt or chain
A timing belt is a wear item. It's replaced on the manufacturer's schedule, by mileage or by age, whichever comes first. For when it's due and what to watch for, see when to replace the timing belt. A timing chain is built to last longer, yet it wears as well: it stretches, makes noise on start-up and throws timing codes. That's a different job, timing chain replacement. We'll check which one your car has and what the interval is for your model and mileage.
Why not to put it off: what a broken timing belt does
When the belt snaps on many engines, the pistons meet the valves and the valves bend. Now you're paying for a cylinder head repair on top of the belt. If you don't know the belt's mileage or age, replace it now.
What is included
- Belt, tensioner and idler rollers.
- The water pump, if the belt drives it. It's usually done at the same time because everything's already open.
- Seals, and the thermostat if needed.
- Timing mark check, first start and a check after the job.
- Not sure about the engine's general condition? Do engine diagnostics first.
How the job is done
- Off come the undertray, ancillaries and covers, and on some models the engine mount.
- The crankshaft and camshafts are locked at the timing marks or with a special locking tool.
- We fit the belt and rollers, plus the water pump and seals if needed, and tension the belt to spec.
- Then we turn the crank by hand a few times to make sure the marks line up again.
- Start-up, and a check for leaks, odd noises and timing codes.
While we're in there we look for oil leaking from the seals and valve cover. Oil eats rubber, and a fresh belt on an oily engine won't last.
What the price depends on
- Engine layout. Transverse and V engines leave less room and take more hours.
- Whether the engine mount, alternator or AC compressor have to come off.
- What goes in the kit: belt, rollers, pump, seals, thermostat.
- Genuine parts or a proven aftermarket brand (fine, but customer-supplied parts carry no warranty).
Price
| Work | Price, GEL |
|---|---|
| Timing belt replacement (labor) | from 90 |
| Water pump replacement together with timing | from 60 |
| Head gasket replacement after damage | from 250 |
FAQ
How much does timing belt replacement cost?
Labor starts at 90 GEL. The parts kit comes on top and depends on the model.
Should the water pump be replaced too?
If the belt drives it, usually yes. It lasts about as long as the belt, and taking everything apart a second time costs more.
What should I do if the belt has snapped?
Don't try to start it again. Have the car towed in and we'll check whether the valves are bent.
How long will I wait?
4-8 hours.
Can I replace just the belt and keep the old rollers?
You can, technically. But a roller with a tired bearing can seize and take the new belt with it, which is why we do belt and rollers as a kit.
● 06 · Contact
Leave a request — we'll call back and book an inspection
Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.
By sending the request you accept the privacy policy.
Or message us — we reply right there:
- Address
- Airport Highway 212M, Batumi, Georgia
- Phone / WhatsApp / Telegram
- +995 599 66 66 75 · WhatsApp · Telegram
- Directions
- Google Maps ↗Yandex ↗Waze ↗
