Engine Rebuild and Overhaul in Batumi
Looking for an engine rebuild near you in Batumi? PRO SERVICE is on Airport Highway 212M. We pull the engine and strip it completely, measure every part, machine the cylinders and crankshaft, put in new pistons and rings where they're worn and repair the cylinder head. It goes back together with new gaskets and consumables. Labor from 1000 GEL, takes 7-14 working days. You get the exact quote after inspection, before a single part is ordered.
When you need a rebuild and when you don't
A rebuild makes sense once the wear has reached the block and the rotating assembly. Typical signs:
- compression is low in several cylinders, not just one;
- it burns oil by the liter, with blue smoke and oil-fouled plugs;
- main or rod bearing knock, or oil pressure falling off when the engine is hot;
- the borescope shows scored cylinder walls;
- damage from serious overheating or running low on oil.
When the trouble is limited to the head (a burnt valve, leaky stem seals, a blown gasket), a cylinder head repair or head gasket replacement will do. That's why engine diagnostics come first. Quite often they point to a much cheaper fix.
How a rebuild goes
- Removal and teardown. The engine comes out and is cleaned, and the parts are laid out cylinder by cylinder.
- We measure the bores, crank journals and clearances and check the block and head for flatness. From that you get a quote with a parts list.
- Machining depends on the wear. It might be honing, boring to oversize or sleeving, plus crankshaft grinding.
- The cylinder head gets its valves lapped or replaced, new stem seals and a flatness check.
- Assembly with new rings, bearings, gaskets and seals, and a new timing set and water pump if needed. Everything is torqued to the manufacturer's values.
- On first start we check oil pressure, look for leaks and make sure it runs right in every mode. Then we walk you through break-in and the first oil change.
What affects the engine rebuild cost
- Engine layout: inline or V, gasoline or diesel, turbo or naturally aspirated.
- How much machining it needs, and whether oversize parts are available.
- OEM or quality aftermarket parts (fine, but customer-supplied parts carry no warranty).
- Work alongside it, such as the turbo, injectors, radiator or engine mounts.
Sometimes a used engine is simply the better deal. If the rebuild comes out more expensive, we'll tell you and lay the two options side by side.
Price
| Work | Price, GEL |
|---|---|
| Engine rebuild (labor) | from 1000 |
| Cylinder head repair | from 300 |
| Diagnostics before a rebuild | from 30 |
FAQ
How much does an engine rebuild cost?
Labor starts at 1000 GEL. Parts and machining are priced after inspection, and you have the full estimate before assembly begins.
Is a diesel rebuild more expensive?
Usually it is. The parts are heavier and the fuel system is more complicated. We price it once we've inspected your engine.
Rebuild or replacement engine?
That depends on the model, what's available and the engine's history. A used engine with no history is a gamble of its own. We compare both on price.
What warranty do you give after a rebuild?
We give a warranty on our work. The term is individual: it depends on the job and the car, and the manager confirms it before work starts
How long will it take?
7-14 working days. Parts delivery and machining decide where in that range you land.
● 06 · Contact
Leave a request — we'll call back and book an inspection
Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.
By sending the request you accept the privacy policy.
Or message us — we reply right there:
- Address
- Airport Highway 212M, Batumi, Georgia
- Phone / WhatsApp / Telegram
- +995 599 66 66 75 · WhatsApp · Telegram
- Directions
- Google Maps ↗Yandex ↗Waze ↗
