Ford Engine Repair in Batumi
Ford engine repair at PRO SERVICE in Batumi, Airport Highway 212M. We diagnose the control unit, replace timing belts and chains, fix leaks and cooling problems, and rebuild engines when it comes to that. Oil and parts are matched to Ford specs. Engine diagnostics start at 30 GEL and take 40-60 min.
Which Fords and which engines
You'll find both kinds of Ford in Georgia: European ones like the Focus, Fiesta, Mondeo, Kuga and Transit, and US imports like the Escape, Fusion, Explorer and F-150. Under the hood they're very different, so step one is always pinning down the engine by VIN.
The 1.0 EcoBoost needs special mention. Its timing belt runs in oil, so the right Ford-spec oil and changing the belt on time really matter here. When that belt starts falling apart, the debris can block the oil pickup.
- Duratec and Ti-VCT petrol engines come with a belt on some versions and a chain on others. Owners usually bring them in for oil leaks, misfires caused by coils and plugs, or cam timing codes.
- The V6 EcoBoost in the F-150, Explorer and other models is well known for timing chains that stretch and cam phasers that wear. You get a rattle on a cold start and cam/crank correlation codes. With those symptoms the chains, tensioners and guides get replaced as a set, and as a rule the phasers too.
- TDCi diesels in the Transit, Focus, Mondeo and Kuga: think injectors, EGR, DPF and the turbo.
Ford engine oil
Ford writes its own oil specs, and on a turbocharged EcoBoost they matter. Viscosity is just one line of that spec. We go by the whole thing as listed in the manual for your engine. With a turbo, hot summers and Batumi stop-and-go, it makes sense to change it before the maximum interval. See oil changes for more.
How we work
- On chain engines we listen to a cold start, which is the main test for a stretched chain. The engine has to be completely cold, so it helps if you can leave the car with us for a few hours.
- You get an itemized estimate covering labor, the timing kit and related parts.
- We do the repair, start it up and recheck for codes.
Price
| Job | Price, GEL |
|---|---|
| Engine diagnostics | from 30 |
| Oil change | from 30 |
| Timing belt replacement | from 90 |
| Timing chain replacement | from 180 |
FAQ
How much is a timing chain replacement on an F-150 EcoBoost?
Labor starts at 180 GEL. The total depends on what goes into the kit: chains, tensioners, guides, phasers. We give you an exact figure after diagnostics and a parts lookup by VIN.
What oil should go in my Ford?
One that meets Ford's spec for your engine, in the right viscosity. We match it by VIN, and the change takes 30-40 min.
A few seconds of rattle on a cold start. Is that dangerous?
On a chain-driven Ford it's a common sign that the chain has stretched or the phasers are worn. Get it looked at now, because if the chain jumps a tooth the repair costs a lot more.
Do you repair Transits?
Yes, petrol and diesel engines alike. With a diesel we begin by checking the injectors and EGR.
● 06 · Contact
Leave a request — we'll call back and book an inspection
Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.
By sending the request you accept the privacy policy.
Or message us — we reply right there:
- Address
- Airport Highway 212M, Batumi, Georgia
- Phone / WhatsApp / Telegram
- +995 599 66 66 75 · WhatsApp · Telegram
- Directions
- Google Maps ↗Yandex ↗Waze ↗
