Timing Belt Replacement Cost and Why Two Cars Get Different Quotes

Timing Belt Replacement Cost and Why Two Cars Get Different Quotes

Updated: · PRO SERVICE

Timing belt replacement labor at our shop starts at 90 GEL. For a timing chain it's from 180 GEL. Parts are paid on top. The final cost depends on how the engine sits in the bay, what goes into the kit and who made the kit. We quote the exact figure from your VIN and engine code before the car ever goes up on the lift.

Two lines on the quote

Line one is labor: the hours it takes to get to the drive, swap it and put everything back. Line two is the kit: belt, idlers, tensioner, sometimes a water pump and seals. Labor depends on the engine. The kit depends on the brand and what's in the box. If a shop gives you one number over the phone without asking the model, that's usually labor with no parts. Or a number with plenty of padding.

Engine layout

A transverse inline four is the most common case and the easiest one. The belt sits on the right side under a plastic cover. Sometimes we support the engine on a jack and pull the right mount, but the job is predictable.

A V6 takes longer. The belt wraps around two heads and four camshafts, there are more marks to line up, and a transverse V6 leaves almost no room to work. Honda J35 (Pilot, Odyssey, Accord V6), Toyota 1MZ-FE and 3MZ-FE (older Camry, Highlander, Sienna), the Hyundai 2.7 V6: all belt engines, and Batumi gets a steady flow of them from US auctions. They take noticeably more hours than an inline engine from the same brand.

Other things that add time:

  • balance shafts with their own belt, as on the Mitsubishi 4G64, so two belts get replaced;
  • a hydraulic tensioner that has to be compressed and set exactly per the manual;
  • an alternator, AC compressor or brackets bolted right over the cover;
  • a longitudinal engine where the fan and part of the cooling system come off first.

Water pump, idlers, seals

On many belt engines the timing belt drives the water pump, and the pump sits right behind it. Replacing it separately a year later means paying for the same teardown twice. So on those engines the pump goes in the kit: you pay for the pump itself, and labor barely changes. The coolant we drain is billed by volume.

Idlers and the tensioner get replaced every time. Their bearings wear at about the same rate as the belt, and a seized idler will shred a new belt just as easily as an old one. Crank and cam seals get replaced if they're weeping. Oil eats rubber, and an oil-soaked belt won't make it to its interval.

Kit brand

There are three tiers. Genuine parts in the carmaker's box. The original supplier under its own name: Aisin, Gates, ContiTech, Dayco, INA, SKF. And cheap no-name kits. The gap between the first and the last can be several times over. We recommend genuine or a known supplier: the belt stays in for years, and what you save on it is pocket change next to a cylinder head job. Your own parts: fine, but customer-supplied parts carry no warranty

Belt and chain are priced differently

A chain isn't replaced on mileage. It's replaced when it stretches. The job almost always costs more: the front engine cover comes off, and the chain, tensioner and guides get replaced, plus sprockets and cam phasers if they're worn. On some engines the chain sits at the back, on the transmission side. The BMW N47 diesel and the Volkswagen VR6 are two examples. There the engine comes out, and the quote is in a different league.

Why timing belt replacement gets expensive

What the car hasEffect on the quote
Transverse inline enginebaseline
V6 with a beltmore hours: two heads, more marks
Belt-driven water pumpplus the pump and coolant
Balance shaft beltsecond belt and idler
Weeping sealsplus seals and time
Chain on the transmission sideengine removal

How we quote before starting

  1. We pull the engine code and drive type from the VIN.
  2. We figure labor for your specific engine.
  3. We price the kit in two or three options.
  4. On the lift we check the seals, pump and mount. If we find anything beyond the quote, we call you first.

When to replace the belt and how to tell it's due is covered in when to replace a timing belt. How a chain drive differs from a belt is in timing belt or chain.

Where to get it done in Batumi

PRO SERVICE, Airport Highway 212M: timing belt replacement and timing chain replacement. Belt from 90 GEL. Chain from 180 GEL. We quote two kit options by VIN. Other labor rates are on the prices page.

FAQ

Why did another shop quote less?

Compare what's included. A low number often means a belt alone, no idlers, no pump. A year later an idler starts whining and the car is back on the lift.

How long does it take?

A V6 or a rear-mounted chain takes longer, and we give you the timeline with the quote.

The belt already snapped. What will it cost?

Then we're pricing a cylinder head, not a belt. We check the valves first, then quote the cylinder head repair. Don't crank the engine. Have it towed in.

I bought a car with no history. Replace it now?

Yes. No receipt for the belt means it was never done.

●  06 · Contact

Leave a request — we'll call back and book an inspection

Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.

By sending the request you accept the privacy policy.

Or message us — we reply right there:

Address
Airport Highway 212M, Batumi, Georgia
Phone / WhatsApp / Telegram
+995 599 66 66 75 · WhatsApp · Telegram
Directions
Google Maps ↗Yandex ↗Waze ↗
PRO SERVICE entrance