Honda Fit Oil Change in Batumi
Honda Fit oil change in Batumi at PRO SERVICE, Airport Highway 212M, done in 30-40 min. We drain the old oil, fit a new filter and a new aluminum drain washer, fill with the thin oil Honda designed the L-series engines around, and clear the service reminder. Labor from 30 GEL. Bringing your own oil: fine, but customer-supplied parts carry no warranty.
The Fit runs a 1.3 or 1.5 liter engine that holds very little oil, so being half a liter low already matters. The model as a whole, its CVT, hybrids and suspension, is covered on the Honda Fit page. Brand-agnostic basics are in engine oil change.
What oil does a Honda Fit take? Chassis code first
The chassis code tells us more than the model year. It's on the plate under the hood or in the papers.
- GD (2001-2008). L13A i-DSI with twin plugs per cylinder, and the L15A VTEC. Japanese manual calls for 0W-20. US 2007-2008 cars list 5W-20.
- GE (2007-2013). L13A and L15A i-VTEC, plus the GP1 Fit Hybrid with the LDA engine and IMA. 0W-20.
- GK (2013-2020). L13B and L15B, the 1.5 with direct injection, plus the GP5 Hybrid with the LEB engine and the i-DCD dual-clutch. Also 0W-20.
A US-market Fit 1.5 takes about 3.4 liters with the filter. Japanese 4WD cars and hybrids we look up by chassis number. A 4-liter jug is enough, and you keep the rest in the trunk for top-ups.
The filter is a small spin-on, the same size Honda used on the Civic and Jazz of those years. We use a Honda part or an aftermarket one with an anti-drainback valve. Without that valve the filter empties overnight and the engine runs nearly dry for a second or two every morning.
Japanese paperwork, American reminder
Most Fits here came from Japan. The service book is in Japanese, and there's often a sticker from a Japanese shop on the windshield with the date and mileage of the last change. It shows when. It doesn't show what oil went in. That's why we suggest servicing a Japanese Fit right after you buy it.
US cars have the Maintenance Minder. The dash shows oil life in percent plus a code: A means change the oil, B means oil, filter and an inspection. A number after the letter adds a job: 1 is a tire rotation, 2 is the air and cabin filters, 3 is transmission fluid. The code appears at 15%. We do what it asks and clear it with the knob on the cluster.
How often in Batumi
A small engine pulling the AC in city traffic spends its life at higher revs than a big one would. Plenty of Fits here do deliveries or taxi work and pile up mileage fast. Honda's book calls that severe service, and on cars without the Minder we use the severe-column interval.
What we see on a Fit that went too long:
- Check engine with P2646 or P2647 on i-VTEC engines. VTEC switches on oil pressure, and with low or sludgy oil it can't keep up. A fresh change often clears it. If the code returns, we test the pressure switch and the VTEC solenoid.
- The level sitting well under the mark by the next change. An older L15 may burn a little, but if you top up all the time, book engine diagnostics.
A cold-start tick on these engines is usually not an oil problem. The L-series has no hydraulic lifters, so the noise is valves out of adjustment. Fresh oil won't silence it. That needs a valve adjustment.
The Fit, step by step
Up on the lift, drain warm. The plug goes back only with a new aluminum crush washer, since Honda makes them single-use and an old one leaks. New filter, oiled gasket, hand tight.
We pour in 300-400 ml under the listed figure, run the engine, shut it off, wait a couple of minutes and bring it up by the dipstick. Overfilling a small engine is bad too, so the last bit goes in small amounts.
Hybrids need one extra step. The gas engine shuts off at every chance it gets, but we need it running to confirm the filter is dry. We keep it running with auto-stop off, and the method differs between IMA and i-DCD. The high-voltage battery isn't touched during an oil change.
While the Fit is on the lift
- CVT fluid. GK cars take Honda HCF-2, GE cars take Honda CVTF, the US GE automatic takes ATF DW-1. Burnt smell or unknown history, we'll mention it. More on Fit CVT fluid change.
- Rear diff on 4WD. Leaks and fluid age. Japanese 4WD Fits often show up with the original fluid.
- Engine air filter. The box is on top and opens in a minute. Auction cars sometimes come in with filters gone gray.
- CV boots and tie rod boots. On the Fit's small wheels they're easy to see from below.
Price
| Work | Price, GEL |
|---|---|
| Fit oil and filter change | from 30 |
| 4WD rear differential fluid | from 30 |
| Engine air filter | from 20 |
| Cabin air filter | from 20 |
| Engine diagnostics | from 30 |
FAQ
Can I use 5W-30 since it's easier to find?
To get you home, yes, but not as a habit. The L engine is built for 0W-20: thicker oil circulates slower on a cold start and costs fuel. 0W-20 is easy to buy in Batumi.
How much oil does a Fit take?
About 3.4 liters with the filter for a US 1.5. Japanese versions we confirm by chassis number.
There's a wrench and A1 on my dash. What does it mean?
Oil change due (A) and rotate the tires (1). We do both and clear the code.
Does a Fit Hybrid need special oil?
No, the same low-viscosity oil. The only difference is the leak check afterward, because we have to force the gas engine to run.
Why is the bill on a Fit lower than on a sedan?
It takes less oil. Labor from 30 GEL, and the rest depends on the oil you pick.
● 06 · Contact
Leave a request — we'll call back and book an inspection
Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.
By sending the request you accept the privacy policy.
Or message us — we reply right there:
- Address
- Airport Highway 212M, Batumi, Georgia
- Phone / WhatsApp / Telegram
- +995 599 66 66 75 · WhatsApp · Telegram
- Directions
- Google Maps ↗Yandex ↗Waze ↗
