Why Do My Brakes Squeak: Causes and What to Do
Updated: · PRO SERVICE
Why do my brakes squeak? Most of the time it's surface rust on the discs after rain or a damp night, a wear indicator touching the disc, pads vibrating, or caliper slide pins that have seized. A light squeak in the morning that's gone after a couple of stops is normal. A constant squeal, metal grinding, vibration in the wheel or pedal, or any noise that comes with weaker braking needs checking.
Squeak in the morning or after a wash
A cast-iron disc rusts overnight, especially in Batumi's humid climate. The first few stops wipe it off and the noise goes away, which is perfectly normal. If the car has been sitting a long time, the layer is thicker and the squeak lasts longer. If it's still there after a mile or two, something else is causing it.
High-pitched squeal on every stop
Here are the usual suspects:
- the wear indicator is touching: the metal tab on the pad is hitting the disc, which means it's time for new pads;
- the pads are vibrating in the caliper because the anti-squeal shims are missing or the contact points have no grease;
- seized caliper slide pins make the pad press at an angle, and it sings;
- some pads simply use a harder compound and are noisier than others while braking just fine;
- glazing: after overheating on a mountain descent, the pad surface turns smooth and hard, squeals and brakes worse.
Some of this gets fixed with a caliper service, meaning cleaning, greasing the pins and fitting shims. If the pad is worn or has overheated, it gets replaced.
Grinding and crunching
Metal grinding is the sound to worry about most. Usually it's a pad worn down to the metal, and then the disc takes damage with every stop. Sometimes a small stone gets caught between the pad and disc. That gives a sharp noise that can go away on its own, but it can also cut a deep groove. And with cheap or old pads, the friction material can come away from the backing.
Don't put off a grinding noise. Your stopping distance gets longer and the repair gets pricier, because now the discs need doing along with the pads.
Steering wheel or pedal shakes when braking
That's usually disc runout, meaning uneven thickness or pad material built up on the surface. It comes from overheating followed by sudden cooling (a puddle after a long descent), wheel bolts tightened unevenly or a sticking caliper. Resurfacing the disc sometimes helps if there's enough thickness left. If not, it gets replaced. Suspension play and a worn wheel bearing feel much the same, so we check those at the same time.
Squeak at low speed and when releasing the pedal
A squeak right at the end of a stop in a parking lot often comes from pad and disc surface wear. A squeak or click as you pull away is the pad shifting in the caliper when the direction changes. If you hear the noise without touching the brake, a caliper may be dragging or the disc dust shield may be rubbing. The dust shield is easy to check and fix.
When brakes are dangerous
Head to a shop right away if:
- the pedal feels soft or sinks;
- the car pulls noticeably when you brake;
- you hear metal grinding;
- after a drive one wheel is hotter than the others or smells burnt;
- the brake fluid level has dropped.
What a brake check covers
We take the wheels off and inspect the pads, discs, calipers, slide pins and hoses, then check disc runout and the fluid level. After that it's clear whether a caliper service will do or parts need replacing. Reference prices: pads from 40 GEL, discs from 60 GEL. The final price depends on the model and what's worn.
Where to check brakes in Batumi
At PRO SERVICE (Batumi, Airport Highway 212M) we do brake pad replacement and brake disc replacement. Whether a disc can be resurfaced instead is covered on the disc resurfacing page.
FAQ
Can grease stop the squeak?
Only when pad or pin vibration is the cause. Grease on the pad's friction surface or on the disc is dangerous.
Why do new pads squeak?
They weren't bedded in, the compound is wrong, the shims weren't fitted, or the old disc is worn.
Can a disc be resurfaced instead of replaced?
Yes, as long as its thickness after machining stays within the manufacturer's limit.
Is squeal after a wash or rain normal?
Yes, if it goes away after a couple of stops. That's a light film of rust on the discs. If it lasts all day, comes with vibration or the car pulls to one side, have it inspected.
● 06 · Contact
Leave a request — we'll call back and book an inspection
Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.
By sending the request you accept the privacy policy.
Or message us — we reply right there:
- Address
- Airport Highway 212M, Batumi, Georgia
- Phone / WhatsApp / Telegram
- +995 599 66 66 75 · WhatsApp · Telegram
- Directions
- Google Maps ↗Yandex ↗Waze ↗
