How to Choose Engine Oil: Viscosity, Approvals and Fakes

How to Choose Engine Oil: Viscosity, Approvals and Fakes

Updated: · PRO SERVICE

Your owner's manual shows how to choose engine oil in three lines: the SAE viscosity, the API or ACEA class, and the carmaker's approval. If the bottle matches all three, the oil is right for your engine, and the only questions left are price and buying from a store that doesn't sell fakes. If the approval isn't on the label, an expensive brand won't make up for it.

Where to look first

The quickest answer is in the owner's manual, in the fluids section. It lists the viscosity (sometimes two or three options by outside temperature) plus the spec. Cars bought at US auctions or brought over from Korea often show up with no manual at all. Then we check the oil filler cap. Toyota, Honda, Hyundai and Ford often print the grade right on it: 0W-20, 5W-20, 5W-30. The third way is a parts catalog lookup by VIN and engine code. That's what we do when a car comes in for the first time and the last owner has no idea what went in.

What the numbers in 5W-30 mean

The number before the W is about cold starts. The lower it is, the faster oil gets around the engine in the first seconds after you turn the key. The second number is viscosity at operating temperature, roughly 100 C. Hot, a 0W-20 and a 5W-20 are nearly the same oil. A 5W-40 is thicker than both.

Batumi barely sees frost, so the first number can look pointless here. It isn't. For the engine, every morning start is a cold start: the oil in the pan sits at 15-20 C while the engine runs at 90-100. Thin oil at startup reaches the camshafts, the timing chain and the turbo sooner. So 0W and 5W grades make sense on the coast too.

Why "thicker for the heat" doesn't work

The advice you hear at parts counters goes like this: it's hot here, run 10W-40. The trouble is that oil temperature is set by the engine and its cooling system. Hot weather adds a couple of degrees, not much more. An engine built for 0W-20 has tight clearances, and its variable valve timing, hydraulic lifters and chain tensioner all run on oil pressure at that viscosity. Thick oil takes longer to reach them after a start, the engine works harder, fuel use goes up. On some cars that "upgrade" sets off cam timing codes.

There's one case where a heavier grade is fine: when the manual itself gives a viscosity range for hot climates. Plenty of European and Korean manuals have that chart. Stay inside that range and you're good.

Thick oil won't cure an engine that already burns oil either. You'll top up a little less often, and the worn rings or valve seals will still be there. More on that in engine burning oil.

API, ACEA and carmaker approvals

API and ACEA describe the general level of the oil. For a late-model gas engine, look for API SP. Among other things, it's tested for protection against low-speed pre-ignition (LSPI) in turbocharged direct-injection engines. SN is fine for an older engine if the manual allows it. ACEA has two families. A/B (A3/B4, for example) covers regular gas and diesel engines. The C family (C2, C3, C5) is for cars with a diesel particulate filter: lower ash, sulfur and phosphorus, so the filter lasts its full life.

The carmaker's approval is the strictest test. Examples: VW 504 00/507 00, Mercedes 229.51 or 229.52, BMW Longlife-04, GM dexos1, Renault RN0710, Ford WSS-M2C913-D. The number is printed on the back label. "Meets the requirements of" is weaker than "approved": it means the oil company never ran the official tests.

What common Batumi cars usually call for

CarWhat the manual usually says
Toyota, Lexus, hybrids0W-20, 0W-16 on some newer engines, API SP or ILSAC
Honda, Hyundai, Kia gas engines0W-20, 5W-20 or 5W-30 depending on the engine
VW, Skoda, Audi TSI/TFSI5W-30 with 504 00/507 00, newer engines 0W-20 with 508 00
Mercedes229.5x approval, viscosity per the manual
Diesel with a particulate filterACEA C2/C3 or the carmaker's approval
LPG-converted carsame as for gasoline, per the manual

Use the table as a starting point. For your exact car we look it up by VIN.

How not to buy fake oil

Counterfeit oil does turn up in Georgia, mostly under the best-selling brands. Things you can check in the store:

  • the price is way under what the official distributor charges;
  • the label print is uneven, the fonts don't match, the edges peel;
  • there's no foil seal under the cap, or the ring is already broken;
  • the batch number and date are on a sticker instead of printed on the plastic;
  • some brands put a verification code on the jug, and checking it takes a minute.

Your safest bet is the official distributor or a big store that gives you a receipt. You can also bring your own oil to us. You can bring your own parts, but they carry no warranty. New parts we supply come with a warranty of 30 days or more from fitting, depending on the part. We can order parts for any car.

If you don't know what's in the engine

For a car with no service history, book an oil change at PRO SERVICE on Airport Highway 212M. We pick the oil by VIN and show you the approval on the jug before it goes in. Labor starts at 30 GEL. For intervals, see how often to change engine oil. If the level keeps dropping between changes, start with engine diagnostics.

FAQ

Can I use 5W-40 instead of 5W-30?

If your manual lists 5W-40 for your engine, yes. If it only lists 5W-30 or 0W-20, no.

Which synthetic brand is best?

The brand comes second. Approval and viscosity first. A mid-priced oil with the right approval beats a premium one without it.

Can I mix two brands of oil?

Topping up on the road is fine as long as the grade and class match. Driving on the mix until the next change won't hurt anything.

Does a car on LPG need special oil?

No. Carmakers don't have a separate LPG approval. You'll see oils marketed "for gas engines", but the approval in your manual is still what counts.

●  06 · Contact

Leave a request — we'll call back and book an inspection

Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.

By sending the request you accept the privacy policy.

Or message us — we reply right there:

Address
Airport Highway 212M, Batumi, Georgia
Phone / WhatsApp / Telegram
+995 599 66 66 75 · WhatsApp · Telegram
Directions
Google Maps ↗Yandex ↗Waze ↗
PRO SERVICE entrance