Car Plastic Repair in Batumi

Car Plastic Repair in Batumi

Car plastic repair at PRO SERVICE (Batumi, Airport Highway 212M): we weld and bond cracks in fender liners, grilles, trim and mounts, rebuild snapped tabs, and paint the part if it needs it. Prices start at 89 GEL. It usually takes 1 day.

What we repair

  • Fender liners and underbody shields with tears or broken mounting points.
  • Radiator and bumper grilles: cracks, snapped crossbars.
  • Trim and moldings that are chipped, cracked or scuffed.
  • The mounting tabs on headlights and bumpers.

Plastic welding or replacement

As long as the part still holds its shape, we weld it and reinforce it with mesh. Once the plastic has started crumbling, or the part is easy to get hold of, replacing it costs less. Parts that are painted get painted again after the repair; see bumper repair and bumper painting.

Price

WorkPrice, GEL
Crack weldingfrom 89
Mount (tab) repairfrom 50
Repair with paintingfrom 250

How a crack repair works

  1. The part comes off, gets cleaned and degreased, and we read the material marking on it (PP, ABS, PC and so on).
  2. We drill the ends of the crack so it can't spread.
  3. Mesh gets melted into the back for strength, and the front is filled with welding rod made of the same plastic.
  4. Sanding and shaping. If the part is a painted one, primer and paint follow.
  5. Back on the car, and we check the mounts.

What affects the price

How long the crack is, and how many there are on the part. Snapped mounting tabs, which take more work to rebuild than a straight crack does to weld. The surface you're starting with: painted, textured black, or glossy chrome-look. Whether the bumper or headlights have to come off to get at it. And what a new part would cost and how easy it is to find, because sometimes swapping it is simply the better deal.

Car before repair Car after repair BeforeAfter

FAQ

How much does plastic repair cost?

The price depends on the part and how long the crack is. It's from 89 GEL.

How strong is the repair?

Welded properly with mesh, it'll take the normal loads that part sees on the road. Warranty: 30 days on new parts we supply and on fitting them; for other jobs the manager confirms the term before work starts.

Can any plastic be repaired?

Not every type. We read the material off the marking on the part and tell you before we start.

How long will it take?

1 day.

Can I just glue it or use zip ties?

To get yourself home, sure. Glue doesn't hold well on polypropylene though, and road vibration keeps working the crack open. A welded repair with mesh lasts far longer.

Will textured black plastic show the repair?

Up close you may see the weld on textured trim. We can either hide it on the back side or paint the part. We'll agree which before starting.

My wheel arch liner is torn and rubbing the tire. Is it safe to drive?

For a short distance, slowly. A loose edge can get wrapped around the wheel or yank on sensor wiring. Tie it up for now, and in the shop we'll weld the tear and rebuild the clips and mounts.

Do you repair chrome or gloss black trim?

We can weld a crack, but there's no restoring the chrome layer where the repair is. Gloss black trim has to be painted after welding. For chrome pieces a replacement usually makes more sense.

●  06 · Contact

Leave a request — we'll call back and book an inspection

Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.

By sending the request you accept the privacy policy.

Or message us — we reply right there:

Address
Airport Highway 212M, Batumi, Georgia
Phone / WhatsApp / Telegram
+995 599 66 66 75 · WhatsApp · Telegram
Directions
Google Maps ↗Yandex ↗Waze ↗
PRO SERVICE entrance