What Affects the Cost of Painting a Car: Per Panel vs Full Respray
Updated: · PRO SERVICE
What affects the cost of painting a car most is the prep work. Dents, rust and old filler take more hours than the spraying itself. After that come the number and size of the panels, the paint type (metallic, pearl, tri-coat), whether parts get removed and how hard the color is to match. Painting one panel and respraying the whole body are different jobs, and they're priced differently.
Per panel or full respray: the difference
With per-panel painting, only the damaged parts get paint, say a bumper, a fender or a door. That's the usual route after a minor accident or for scratches and chips. When the damage is small and sits near the edge of a panel, spot painting may be all you need. We paint just that area and blend the clear coat out.
A full respray covers the whole body. Trim and attached parts come off, every surface is prepped, the car is painted in a booth and then put back together. People go for it when the paint has faded and cracked all over, when there's a lot of damage, or to change the color. The steps are laid out on the full respray page.
Bear in mind that a full respray doesn't cost the panel price times the number of panels. Some of the work is done once for the whole car, and some gets added on, like door jambs, disassembly and reassembly, and extra material.
What changes the price
| Factor | Effect |
|---|---|
| Panel condition | Dents, rust, old filler mean more prep, the biggest part of the job |
| Panel size | A hood or roof takes more material than a mirror or a handle |
| Material | Plastic needs its own primer, metal needs anti-corrosion prep |
| Paint type | Metallic, pearl and tri-coat colors cost more and are harder to match than solid colors |
| Part removal | Removing the bumper, lights, handles takes longer but avoids tape lines |
| Color matching | Faded paint needs shade correction and blending into neighboring panels |
| Vehicle size | A crossover or SUV has more area and more panels |
| Color change | Adds door jambs, trunk and engine bay |
Why quotes from different shops vary so much
Two quotes for "painting a fender" can be several times apart and both be honest, as long as they cover different scopes. When you compare them, ask a few questions.
- Is it painted in a spray booth? Without one, dust gets into the paint and the clear coat dries unevenly.
- Are parts taken off? Masking is quicker, but the edges often end up with ridges and missed spots.
- Is the prep included? Sometimes the price covers only the spraying, and filler and primer are billed separately.
- How is the color matched, by code alone or with a test spray-out held up against the car?
- Does it get polished afterward? Final polishing takes out dust nibs and evens out the gloss.
The cheapest paint job often turns out to be the most expensive. After one season of sun and sea air in Batumi, a badly prepped panel starts to bubble or shows a different shade.
When painting the whole car pays off
A full respray makes sense when:
- lots of panels are damaged or faded, and doing them one by one comes close to the price of a full respray;
- the clear coat is peeling in patches all over, so spot repairs would never end;
- you want a different color;
- you're getting the car ready to sell and a patchwork finish would pull the price down.
If only one or two panels are damaged and the rest of the paint is fine, a full respray is money down the drain. Factory paint counts at resale as well, since buyers go over cars with a paint thickness gauge.
How to get an exact price
A photo only gives a rough idea, because it can't show how deep a dent is, old filler or rust under the paint. The exact estimate comes from an inspection. The technician goes over the panels with a thickness gauge, looks at the edges and mounting points and finds the paint code. A good estimate lists the work for each panel, so you can compare quotes line by line.
Where to get a car painted in Batumi
At PRO SERVICE (Batumi, Airport Highway 212M) we paint single panels and do full resprays. You get an exact estimate after inspection. More: bumper painting, spot painting, full respray.
FAQ
How much does it cost to paint one panel?
It depends on the part and its condition. Reference prices: bumper painting from 350 GEL. Spot painting from 149 GEL.
How much does a full respray cost?
Reference price for a passenger car. It's from 4000 GEL. The total depends on the body's condition, and more prep means a higher price.
Can you paint only part of a panel?
Yes, if the damage is small and near the edge. In the middle of a hood or roof the transition would show, so the whole panel gets painted.
Is it cheaper to paint without removing parts?
A little cheaper on labor, but the result is worse, with tape lines along the edges and poorly covered lower edges.
● 06 · Contact
Leave a request — we'll call back and book an inspection
Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.
By sending the request you accept the privacy policy.
Or message us — we reply right there:
- Address
- Airport Highway 212M, Batumi, Georgia
- Phone / WhatsApp / Telegram
- +995 599 66 66 75 · WhatsApp · Telegram
- Directions
- Google Maps ↗Yandex ↗Waze ↗
