Why Car Paint Does Not Match Even When Mixed by Code

Why Car Paint Does Not Match Even When Mixed by Code

Updated: · PRO SERVICE

Why does car paint not match? Because a paint code names a color. It isn't an exact recipe for your particular car. One code covers several factory shade variants, and the paint on your body fades over the years. So a panel sprayed strictly "by code" can look different from the panels next to it. You get a match by doing a spray-out card, checking it in daylight, tinting the mix and blending into the neighboring panels.

What a paint code is and where to find it

The color code is printed on the factory label, usually in the driver's door jamb, under the hood or in the trunk, and sometimes in the service book. No label? The code can be pulled up by VIN from the manufacturer's database. It tells you which color this is in the factory catalog, say a specific silver metallic from a specific brand.

Why the code does not guarantee a match

Shade variants. The same code came out slightly different at different plants and in different model years. That's why paint makers offer several variants for one code, a bit lighter or darker, warmer, or with a different metallic flake size.

Then there's fading. Sun and time change the body color. Reds and dark colors go pale, and the clear coat turns cloudy. Fresh paint mixed "by code" will look brighter than the faded panels around it.

Metallic and pearl paints carry aluminum or mica particles, and how those particles lie depends on coat thickness, gun pressure and distance. Spray the same mix a different way and you get a different shade, especially when you look at it from an angle. Even plastic and metal can look slightly off under identical paint, as on a bumper next to a fender, because the substrate and primer differ.

Lighting plays tricks too. A difference you can't see under booth lamps jumps out in sunlight or in the evening with light coming from the side. That's why color gets compared in daylight and from several angles.

How painters achieve a match

StepWhy
Code from the label or by VINIdentify the base color
Pick the shade variantFind the closest factory variant
Spray-out cardSpray a test card and hold it against the body
Check in daylightCatch differences you can't see under lamps
TintingAdjust the recipe to match a faded body
Blend into neighboring panelsFade the color in gradually so there's no visible edge

Some shops use a spectrophotometer, a device that reads the color right off the body. It helps find the recipe, but the final check is still done by eye with a spray-out card.

What blending is and when it is needed

Blending means the new paint doesn't stop at the repaired panel. It goes partway onto the neighboring one and fades out, and clear coat goes over both panels. That way your eye doesn't catch a hard edge. On metallics and pearls it's almost always needed, especially light ones like silver, gray and white pearl. With solid (non-metallic) colors you can sometimes skip it.

Blending adds work, so it should show up as a separate line in the estimate.

What to ask before painting

  • Will they spray a test card and compare it with the body?
  • Do the neighboring panels need blending, and is that in the price?
  • Where will they check the color, in the booth or in daylight?
  • What happens if the shade still doesn't match after painting?

If the color already does not match

When the difference is small, polishing the neighboring panels can sometimes close the gap. Taking off the cloudy layer of clear makes the old paint look brighter. If the mismatch is obvious, the panel gets repainted with blending. Repainting with "the same code" and no tinting is pointless, because you'll just get the same result.

Where to match paint in Batumi

PRO SERVICE, Airport Highway 212M, Batumi, does paint matching by code with a spray-out card checked against your car in daylight. We also do spot painting and door painting, blending wherever it's needed.

FAQ

How much does paint color matching cost?

At PRO SERVICE. Color matching starts from 30 GEL. Spot painting starts from 149 GEL.

Can I buy a spray can by code and touch up myself?

For a small chip, yes, with some caveats. On a visible area a spray can almost always leaves a difference in shade and texture.

Why does white not match either?

There are lots of whites: pure, cream, three-coat pearl. White pearl is one of the toughest colors to match.

Is a spectrophotometer 100% accurate?

No. It gives you a good starting point, and the final color gets dialed in with a spray-out card.

●  06 · Contact

Leave a request — we'll call back and book an inspection

Tell us what happened to the car. We'll call back, answer your questions and find a time. We give the exact price after an inspection: photos don't always show the damage.

By sending the request you accept the privacy policy.

Or message us — we reply right there:

Address
Airport Highway 212M, Batumi, Georgia
Phone / WhatsApp / Telegram
+995 599 66 66 75 · WhatsApp · Telegram
Directions
Google Maps ↗Yandex ↗Waze ↗
PRO SERVICE entrance